Official Gary’s Hot Glue Sticks  (Large Pack)

Gary’s glue sticks are 11.40 +/- 0.4mm in diameter, best suited for a 12mm glue gun.

Gary’s glue stick is a standard Hotmelt adhesive designed for bonding paper, corrugated board and other open materials (e.g. fabrics)

Must be stored at room temperature.

Colour = CLEAR

1 x 10kg box – 330 Glue Sticks

Gary’s Glue Small Pack is ideal for the Arts n Crafts hobbyists and everyday users of glue sticks. Gary’s glue sticks are 11.40mm in diameter, suitable for any 12mm glue gun. 

With 12 glue sticks in the pack, it’s the best value for money. The pack is neat and compact so it wont take up much desk space and is very user friendly. Get your creative juices flowing with our Small Pack size glue sticks! 

Colour: Amber

Length: 300mm

Width: 11.40mm

Gary’s Glue sticks is a standard Hotmelt adhesive designed for bonding paper, corrugated board and other open materials (e.g. fabrics)

Must be stored at room temperature.

Gary’s Glue Transparent belongs to the new generation of MS-polymer sealants, which combines the best qualities from silicone- and polyurethane sealants. The sealant cures by reaction with the moisture in the air to an elastic joint.

Gary’s Glue Transparent is completely odourless, neutral and fast curing. It can be painted and has a remarkable resistance to climatic influence. Gary’s Glue Transparent does not contain solvents, silicone or isocyanate.

Gary’s Glue Transparent is used for assembling in the body work-, ship- and container industries, where hard and resistant bonding / sealing are required. Gary’s Glue Transparent is also suitable for joints in wooden and concrete floors.

Gary’s Glue Transparent can be used for interior jointing. As an adhesive, Gary’s Glue Transparent can be used both indoor and outdoor.

Gary’s Glue Transparent is approved for indirect contact to foodstuff.

Application: The tip of the cartridge is cut off with a keen knife after which the tip is cut with

an inclined cut, which is a little smaller than the width of the joint. The sealant is

applied by means of a hand- or pneumatic gun.

Curing: Skin forming within approx. 20-40 min at 23 °C and 50 % RH and for the transparent

Approx. 3-5 min. at 23 °C and 50 % RF.

Transparent: approx. 2.5 mm/day at 23 °C and 50 % RF.

10 mm/week at 23 °C and 50 % RH.

The curing time is slowed down at lower temperatures and lower relative

humidity.

Gary’s Glue PU is a moisture-curing, solvent-free one-component polyurethane adhesive.

Gary’s Glue PU is used for bonding wood, steel, various insulation materials and GRP materials.

Colour: light beige

Weight: 750g

Open time: 12 minutes at 23°C

Press time: 30 minutes at 23°C

Application weight: 150 – 300 g/m2

Viscosity: 4,000 mPas

Tensile shear strength:

• Stainless steel / stainless steel 6 N/mm2
• Aluminium / aluminium 4 N/mm2
• Common beech / common beech 8,9 N/mm2

MS Polymer Adhesive Sealant

Why Should I Use Gary’s Glue HI-TACK Instant Grab Adhesive?

Benefits:-

• Bonding of all types of substrates, wood metal, concrete, ceramic & much more.
• The product works underwater & is waterproof.
• It has a holding bond in 5 seconds and a fully formed bond in 25 minutes (substrate dependent)

One glue for all jobs, Gary’s Glue.

A caulking gun is required when using Hi-Tack Instant Grab Adhesive.

Fast Curing D4 adhesive gluing for wood interior areas with frequent long – term exposure to running or condensed water. Exterior areas exposed to weather.

D4 for glue is commonly used by Kitchen Manufactures and Joiners around the globe!

PACK SIZE: .75kg

LEAD TIME: 24hrs

Fast curing D3 adhesive gluing wood interior areas with frequent short-term exposure to running or condensed water and/or heavy exposure to high humidity.

For exterior areas not exposed to water.

D3 for glue is commonly used by Kitchen Manufactures and Joiners around the globe!

PACK SIZE: .75kg

LEAD TIME: 24hrs

(Product image for illustrative purpose only, packaging colour/size may differ)

Fast set cartridges for cartons/paper/board etc 43mm x 43mm
10kgs Net Weight